Whether you want to soften up your feet or you are looking for a day of pampering, providing yourself a pedicure is a perfect solution. There is a simple method on how to do the pedicure.
Pick up your materials. For a good quality pedicure, you’ll require some basic toe-tampering supplies. Remove any pre-existing nail polish. Start your soak. Fill a tub with hot water, a few bath salts or oils. Now it’s time to sit back. Let your feet soak for about 10 minutes; the hot water will make pliable tough calluses and remove the dirt that might have built up. It will also aid to soften your nails.
Cut and file your nails. The shape of the nail should be somewhat squared, following the natural topline of your toes. Utilize your nail file to buff down to the sharp edges of the nail the clippers might have leftward, and to do any further shaping you would like.
Smooth out the split ends of your nails. Use your polishing pad to file down the ridges and rough edges on the tops of your nails. Pay specific attention to the edges that you’ve just trimmed or filed, as this area normally needs to be beveled a bit to create a level plane, so to speak. Utilize your buffing pad in the same direction and slant the angle of it to reach the entirety of each toenail.
Clean up and make softer your skin. Now it’s time to move onto your real feet. Use your pumice stone to brush down the calluses on the heel and ball of your foot. You shouldn’t scrub too unevenly in these areas because too much irritation causes the skin to reply by thickening to protect the delicate tissue underneath, and that becomes an infinite cycle so gentle buffing on the surface with little or no pressure is best. When you’ve detached any dried skin, you can use a scrubbing brush to clean up your foot. Use the brush on your toes and all over the bridge of your foot. Be sure to rinse off your feet with a water after scrubbing.
Finish arranging for polish. Remove your feet from soaking tub and empty it out. Dry your feet off, massage on a layer of lotion into your skin. If you select to do this, use a bit of nail polish remover to clean up your nails again. Now add your base coat. Use a clear nail polish as a protecting base coat on all your toenails. This will stop your nail polish from yellowing your toenails, as well as give your polish a solid base to stick to.
Select a nail polish color, and paint each of your toenails. Wait a few minutes for your polish to dry, and insert a clear top coat. This will fix your polish in place, and help it to last longer deprive of chipping. Then, defend your feet for 10-15 minutes while the polish completely dries. Go show off your cute new toes, and enjoy your soft new feet.